Design of Arizer Solo 2
The Arizer Solo 2 has an unremarkable yet utilitarian appearance. It has a responsive circular navigation pad and an OLED screen above it that displays important information such as the temperature setting and battery status.
It is also quite simple to use, since all you have to do is insert the mouthpiece into your herb and place it in the oven. It is one of the simplest and quickest filling methods available.
The general simplicity of the design may not be particularly fascinating, but the device’s usability makes up for it. Additionally, the device has a strong, durable feel. Once held, it is evident that the fit and finish are of the highest quality; nothing feels cheap or shoddy.
The glass stem is composed of heat-resistant, robust borosilicate glass. The long air channel helps to keep the vapor cool, and the neutral material of the glass helps to preserve the flavor of the vapor.
The partition separating the airway from the area of the mouthpiece where the herb is put features four large air holes.
You can use one of the filter screens if you choose, but it’s not necessary, especially considering that you’ll have to clean them if you do. As long as the herb is not too finely ground, you won’t need those screens.
The Solo 2 is a bit on the large side for a portable device, so it won’t fit in your pocket. However, it fits perfectly in a handbag or a backpack. Therefore, it is better suited for vaping at home as opposed to bringing it on a hike or other outdoor activity, especially considering the lengthy glass stem.
Specifics of the Arizer Solo 2
Arizer Solo 2 Controls
The Solo 2’s circular control panel is intuitive and extremely user-friendly.
The lengthy borosilicate glass mouthpieces included with the Solo 2 are a trademark of Arizer and its most distinguishing characteristics.
In addition to facilitating the loading process, the extended air passage serves to cool the vapor before it reaches the user’s mouth. The neutral composition of the glass also aids in maintaining the purity of the vapor’s flavor, preventing it from being corrupted by foreign substances.
The glass mouthpieces are some of the nicest features of any vaporizer, despite their seeming simplicity.
Arizer Solo 2 Use Instructions
To load the Arizer Solo 2, all you need to do is dip the end of the mouthpiece into your ground herb.
Insert the bottom end of one of the glass tubes into the herb, tap the end to create a small gap between the herb and the opening, and then insert the tube into the herb chamber.
To activate the device, simultaneously press and hold the menu and up buttons.
Press the up and down buttons to adjust the temperature in 1° increments, or hold them for 10° increments.
When heating is complete, inhale through the mouthpiece.
Upkeep and Cleaning of the Arizer Solo 2
The Arizer Solo 2 is one of the vaporizers with the lowest maintenance requirements. Only the glass tubes must be cleaned, and doing so is straightforward. The provided cleaning tool is utilized to remove any herb residue from the glass tube.
If you want to be more thorough, you can soak them for a few minutes in isopropyl alcohol and then rinse them with hot water. The oven requires occasional cleaning, which may be accomplished by using an iso-soaked cotton swab while holding the Solo 2 upside down.
Do not leave herb residue in the glass tube for too long, as it will dry, get sticky, and make cleaning more challenging. Instead, clean the mouthpieces immediately following each use while they are still somewhat warm and the residue is still loose.
Performance and Quality of the Arizer Solo 2 Vaporizer
The Arizer Solo 2 generates superb, flavorful vapor, especially at lower temperatures. However, higher temperatures result in heavier clouds.
In addition to being quick to load, the Solo 2 is also convenient because to its rapid heating. And, unlike smaller vapes, the Arizer Solo 2 doesn’t get heated after extended usage.
The Solo 2’s vapor is pure, smooth, and cool due to the hybrid heating system and borosilicate mouthpieces. This is because the mouthpieces provide a lengthy air route that cools and keeps the vapor clean.
Due to its length, the longer mouthpiece is superior for keeping the vapor cool. When determining which mouthpiece to use, you should keep in mind that the vapor feels warmer with the shorter mouthpiece.
The density of your grind and how tightly you pack your herb affects the draw resistance. If the herb is not ground finely enough and the stem is overpacked, the pull will be rather constricted. Finer grinds and a looser pack will result in more fluid vapor.
The Arizer Solo 2 creates significantly more dense, visible vapor than you would anticipate from a cannabis vape. When selecting a temperature, keep in mind that the vapor is denser at higher degrees while the flavor is better at lower temperatures.
The Solo 2 can hold around 0.15 grams of herb, however you are not need to fill it to capacity. Microdosing is achievable by using only enough herb to fill the stem. To vaporize the herb, however, you will need to set the temperature a bit higher than usual.
The Solo 2 is one of the better Arizer dry herb vaporizers, but if you want to know if it’s the finest Arizer vaporizer, check out the comparison between the Solo 2 and the Arizer Air 2 and the Arizer Go.